中文版 ENGLISH 联系我们 销售热线:0550-3161356
 
 
产品展示
 
家电设备
 
汽车设备
 
模具
 
家电设备
当前位置:首页 > 产品展示 > 家电设备
汽车座垫环型发泡生产线

汽车座垫环型发泡生产线

  该生产线为汽车座垫发泡设计制造的。采用20~50工位地轨式输送,环形链式传动结构形式,由伺服电机或变频电机驱动,通过链轮、链条带动小车运行。加热方式为模温机水加热或蒸汽加热。生产线主要由循环驱动、夹具自动排气、夹具自动倾斜、夹具自动开锁、夹具自动开盖、手动下料、清泡、人工涂脱模剂、人工上辅料、自动充注、自动合盖、夹具自动接气、夹具复位、夹具自动合锁、加热固化循环等工序组成,应用于汽车座垫批量发泡生产。

The line is designed for producing the foamed seat of automotive. It adopts 20~50 station with elliptical layout, chain driving system by servo motor or converter motor. The trolleys run along the ground rail and is driven by chain driving system. The heating type adopts mould temperature controller or hot steam. The line mainly consists of following process: recycle chain driving, air exhausting for fixture, tilting for fixtures, automatic unlocking, automatic open, manual unloading, manual clean, manual daubing releasing agent, manual loading assisting parts, automatic injection, automatic closing, automatic air connecting, fixture moving in position, automatic locking to fixture, curing recycle etc. The line is suitable for high production efficiency.

技术性能参数Technical Data

1、    循环工作台车尺寸(LBmm  1700×850(或按客户要求);

Trolley dimension:                                    1700×850 (or according to requirements)

2、    充注形式:                     机器人自动充注(客户自备);

Injection type:                     automatic injection (robot provided by buyer)

3、    充注介质:                     按产品要求由客户确定;

Foaming agent:                      according to requirement provided by buyer

4、    生产线循环速度:               10~30/1台车;

Recycle speed:                      10~30s/trolley

5、    工位数:                       20~50

Station:                            20~50

6、    台车搭载模具:                 大模具1/1台车、小模具2/1台车;

Trolley for Fixture:                big fixture with 1 trolley, small one with 2

7、    模具合模方式:                 气囊锁模;

Closing type:                       gasbag locking device

8、    驱动方式:                     电机减速机驱动牵引链牵引台车运行;

Driving system:                     motor driving chain that pulls trolleys.

9、    加热方式:                     蒸汽加热或模温机水加热;

Heating type:                       steam or mould temperature controller

10、 压缩空气供应量:               1(0.5MPa)5M³/H

Air supply:                         1(0.5MPa)5M³/H

11、 电容量:                        50~150KW380v50Hz);

Power supply:                                           50~150KW380v50Hz);



 
 
 
 
 
安徽澳门银河装备模具制造有限澳门银河官网 版权所有 电话:0550-3306666 地址:滁州市城东工业园南京北路459号
皖ICP备05000377号 设计制作:网狐科技